Quick answer
To measure a Florida condo kitchen, record every wall length at counter and ceiling height, ceiling height in several spots, window and door positions, plumbing and outlet locations, and appliance sizes, then measure the elevator and hallway path. Concrete walls and slabs are rarely perfectly straight, so note any out-of-square corners. A professional field measure confirms everything before ordering.
Tools you need
A 25-foot tape measure, a pencil and graph paper (or a notes app), a level, and your phone camera. A second person helps on long walls. Measure in inches and write everything down; memory fails fast.
How to measure step by step
- Sketch the room from above, labeling each wall A, B, C. Mark doors, windows and openings.
- Measure each wall end to end at about 36 inches high (counter height) and again near the ceiling. Concrete condo walls often differ by a quarter inch or more top to bottom.
- Locate windows and doors. Measure from the corner to the edge of trim, then the trim width, then the distance to the next corner. Note sill height.
- Measure ceiling height at three or four points. Slab ceilings in older buildings are rarely uniform.
- Mark utilities. Measure from a corner to the center of the sink drain, supply lines, gas or range outlet, and dishwasher connection. Note heights of outlets and switches.
- Record soffits and bulkheads. Many 1970s and 1980s Florida condos have bulkheads carrying ducts or sprinkler lines that cannot move. Measure depth, height and length.
- List appliances. Width, height and depth of refrigerator, range, dishwasher, microwave and hood, plus door swing.
- Check for square. Measure diagonals or use a framing square in corners.
- Photograph every wall with the tape visible.
Condo-specific measurements
This is where condo projects go wrong. Measure:
- Elevator cab: interior width, depth, height and the door opening. Tall pantry cabinets and long panels must fit, sometimes diagonally.
- Hallways and unit door: width and any tight turns.
- Loading area to elevator: distance and any steps.
- Bulkheads as above, because sprinkler pipes in newer or retrofitted buildings are not movable without fire protection work.
Standard sizes reference
| Cabinet type | Common height | Common depth | Widths |
|---|---|---|---|
| Base cabinet | 34.5 in (36 in with top) | 24 in | 9 to 36 in, in 3 in steps |
| Wall cabinet | 30, 36 or 42 in | 12 in | 9 to 36 in |
| Tall pantry | 84 to 96 in | 24 in | 18 to 36 in |
| Sink base | 34.5 in | 24 in | 30 to 36 in common |
Sizes vary by style line. We confirm exact options per style.
In small condo galleys, 30-inch uppers under a bulkhead are common, and 15-inch or 18-inch bases make room for pull-out storage.
Common mistakes
- Measuring only once at one height.
- Forgetting trim, which eats into window clearances.
- Ignoring dishwasher and refrigerator door swing near corners.
- Not leaving room for fillers next to walls so doors and drawers open.
- Ordering a tall pantry that will not fit the elevator.
Once you have a sketch, upload a photo to HausScan to preview finishes, then send your measurements with a free quote request. Browse sizes and styles in the shop, starting with light, space-friendly options like Shaker White. Condo owners should also read the condo kitchens overview and our HOA approval guide, and high-rise owners the Daytona Beach Shores condo cost guide.
Checklist
- Room sketch with labeled walls
- Wall lengths at two heights
- Ceiling heights at several points
- Window and door positions with trim
- Utility locations measured from a corner
- Bulkhead size and contents noted
- Appliance dimensions
- Elevator, hallway and door measurements
- Photos with tape visible
FAQ
How do I measure my kitchen for new cabinets?
Measure each wall at two heights, ceiling height, windows, doors, utilities and appliances, and sketch it all. A pro field measure confirms before order.
What should condo owners measure besides the kitchen?
The elevator cab, door opening, hallways and unit entry, so cabinets fit through the building.
Can I move a condo kitchen bulkhead?
Often not, because it may carry ducts or sprinkler lines. Design cabinets around it.
What is a filler strip?
A narrow panel between a cabinet and a wall that lets doors and drawers open freely.
Will Haus Cabinets measure for me?
Yes, we confirm measurements before anything is ordered.